DC-BIL-01 — Pump 1 — unswitched supply
← Circuit Register · House-bank supply diagram
Owner-reported circuit purpose; electrical installation not independently surveyed. Owner confirms a distinct unswitched pump feed; pump model, fuse, size and routing to load unverified.
| Field | Record |
|---|---|
| Circuit | DC-BIL-01 |
| Source | BB-003 positive distribution |
| Function / destination | Pump 1, physical motor and control association to EQ-030 unresolved |
| Functional control | Unswitched by House/Autopilot remote controls; independent local/automatic pump control may exist |
| Installed branch fuse / breaker | Unknown; not inferred from historical engineering proposals |
| Source protection / isolation | Unknown; input connection to source and upstream protection not surveyed |
| Cable and return path | Conductor size, route, overcurrent coordination, negative return through the BMV-712 system-side shunt terminal unverified |
This circuit is a functional link, not evidence that a correctly rated protective device has been inspected. The service’s switching state, its fusing and its protective role are independent properties. The unswitched circuits remain live while the House or Autopilot remotely switched feeds are OFF; do not interpret unswitched as unprotected.
Outstanding physical inspection
Identify the fitted circuit protective device and rating, branch/feeder conductor cross-section, its DC panel or load endpoint, correct negative return via the BMV-712 shunt, and the controlling hardware where relevant.