DC-NAV-01 — NASA Combi masthead tricolour/anchor LED
← Circuit Register · Navigation-light topology
Owner-confirmed circuit function, not independently traced or measured. Ragtime’s original Moody NAV LTS breaker panel contains four 10 A breakers. This branch is physically position 1, labelled MAST HEAD LIGHT in the owner-supplied close-up. The 10 A rating comes from owner confirmation, not a visible breaker-body marking.
| Field | Record |
|---|---|
| Circuit ID | DC-NAV-01 |
| Source | EQ-002 NAV LTS panel, upper-left of EQ-001 main DC panel |
| Primary circuit protection | CB-001 10 A, panel position 1 |
| Load | EQ-021 — NASA Combi masthead tricolour/anchor LED |
| Switching and wiring | SW-001 DPDT switches R3/brown and B4/white of the 7 × 1.5 mm² Oceanflex trunk; forecabin-starboard-locker junction leads to separate Oceanflex 2 × 1.5 mm² NASA mast cable. Both wires polarity-reversible; individual mast-core-to-trunk matching not yet recorded. |
| Supply busbar, return path, cable size and length | Owner confirms Oceanflex 7 × 1.5 mm² forecabin trunk and 2 × 1.5 mm² NASA mast cable. No permanently negative lamp conductor; supply polarity reverses via SW-001. Junction pin mapping and cable lengths untested. Schedule |
| Provenance | Owner confirmation, 31 October 2026; any terminal references from earlier DC Logical Circuits notes |
Masthead function: SW-001 reverses polarity to select tricolour versus anchor mode on R3/brown and B4/white, connecting to the two-core mast cable. The old B2/blue and Y3/black switch references are superseded historical evidence, not the current mapped pair. The actual selector contact truth table and individual mast cable core assignment remain untested.
Remaining survey
Confirm breaker maker/DC voltage rating, terminal numbering through the DIN clamp blocks, conductor ampacity/size, return routing, voltage drop and physical device labels. Do not infer a cable size or protection suitability from the stated breaker rating.