DC panel — original handwritten connector schedule
← Configuration · Electrical reference convention · Navigation lighting
Source: Owner’s photographed handwritten connector schedule and routing explanation, 31 October 2026. This is a transcription of historical notes plus an owner-confirmed routing statement, not a present-day continuity survey. The original photo was shared in the audit conversation; this public page contains the transcription. Ambiguous writing remains flagged.
How to read the original card
The handwritten columns are CB / rail / circuit. The middle column uses the owner’s original individual Yellow–Red–Blue cage-clamp connectors in numbered groups. A reference like R2 means red lever in group 2, which does not inherently indicate red insulated wire. The left CB column indicates a label or breaker association, not a verified individual breaker ID.
Entire legible connector schedule
| Handwritten CB/function | Rail connector | Handwritten circuit / cable | Interpretation or uncertainty |
|---|---|---|---|
| NAV LTS (stern, partially overwritten) | B1 | “RG STERN LT” | Stern-light label; “RG” prefix uncertain |
| NAV INSTR | Y1 | “NMEA 2K B” | NMEA 2000 segment B historical label; injection behind DCP owner-confirmed, connector continuity untraced |
| NAV INSTR | R1 | “NMEA 2K A” | NMEA 2000 segment A historical label; injection behind DCP owner-confirmed, connector continuity untraced |
| MAST HD | B2 | “7× BLUE” | Handwritten masthead label preserved; owner says NASA switched pair is R3/B4, not B2 |
| STEAM. | Y2 | “7× YELLOW” | Oceanflex yellow core, originally labelled steaming |
| DECK | R2 | “7× RED” | Oceanflex red core, originally labelled deck |
| NAV LTS (BOW) | B3 | “7× GREEN” | Oceanflex green core, originally labelled bow |
| NC | Y3 | “7× BLACK” | Original NC preserved; older NASA association superseded, common-negative hypothesis untested |
| NC | R3 | “7× BROWN” | Original label preserved; later owner-confirmed NASA Combi switched conductor |
| NC | B4 | “7× WHITE” | Original label preserved; later owner-confirmed NASA Combi switched conductor |
| VHF AIS (edited/crossed text) | Y4 | “RADIO BUS” | Older label; actual connection untraced |
| RADAR | R4 | “RADAR +” | Older label, no protective device established |
| Cabin/bunk lights (overwritten) | B5 | “2× RED” | Separate cable reference; exact cable construction unknown |
| SAL LIGHTS | Y5 | “2× BLACK” | Separate cable reference; conductor dimensions unknown |
| BUNK LIGHTS | R5 | “AFT CABIN” | Aft cabin label; route unknown |
A crossed-out mark between Y4 and R4 does not justify allocating an additional rail position. The first-row lettering and corrected lower-left labels should be treated as provisional until the owner confirms them. NC is not automatically “spare”, “not connected” or “disconnected”.
NMEA 2000 clarification (owner, 6 November 2026): A and B are two segments of one network; each has power injection behind DCP. The owner also confirms a power isolator (EQ-063) between the segments, passing CAN data while separating positive supplies. This does not independently verify the historical R1/Y1 connections; the isolator’s physical location and model remain unreported. See the network and power record.
Supply clarification (owner, 6 November 2026): Both A and B power injections share one 10 A NAV INSTR breaker CB-007. Its panel coordinate, downstream split and the R1/Y1 continuity remain untraced. See DC-N2K-01.
Oceanflex 7 × 1.5 mm² distribution trunk
The owner explicitly confirms that 7× denotes one Oceanflex 7-core cable, with 1.5 mm² cross-section for each conductor. All seven panel-end core identities are now accounted for:
| Core insulation | Panel clamp | Original handwritten function |
|---|---|---|
| Blue | B2 | Masthead (handwritten historical label; superseded for NASA Combi switched pair) |
| Yellow | Y2 | Steaming |
| Red | R2 | Deck |
| Green | B3 | Bow navigation |
| Black | Y3 | NC in CB column; old DPDT note mentions NASA (superseded); −12 V common connection is an assumption, not electrically measured |
| Brown | R3 | NC in CB column; owner confirms this is one NASA Combi switched conductor |
| White | B4 | NC in CB column; owner confirms this is the other NASA Combi switched conductor |
Owner-confirmed physical routing:
- Origin: the cage-clamp rail behind the chart-table DC panel (
CT-R). - Common trunk: the single Oceanflex 7 × 1.5 mm² cable runs forward to the forecabin starboard locker, not directly up the mast.
- Second distribution point: the seven incoming wires are split through another set of similar cage-clamp connectors in that locker.
- Distinct outgoing cable runs: some feed the bow light and forecabin lighting, some return aft into the saloon space, and some run via the swan neck up the mast. These are different wire runs, with no individual secondary cable colours or connector allocations yet established.
Second handwritten card — trunk-core functional allocations
Evidence: A second photographed handwritten card supplied by the owner on 31 October 2026. The owner explicitly confirms the colour names on this card refer to the seven insulated conductors of the same Oceanflex 7 × 1.5 mm² panel-to-forecabin trunk, not to the separate 2-core NASA or 3-core Osculati mast cables. SAL means the saloon’s array of 12 LED downlights, which will be documented separately. The card is transcribed below; it has not been electrically continuity-tested, and the precise physical end/location described by the card is not yet established.
| Seven-core trunk insulation | Second card’s writing | Functional interpretation from card | First card’s handwritten panel reference | Reconciliation |
|---|---|---|---|---|
| Blue | SAL + BLUE | Saloon downlights positive | B2 — MAST HD | Different labels; location/revision unresolved |
| Yellow | SAL − YELLOW | Saloon downlights negative | Y2 — STEAM. | Different labels; do not assume common power or hard-wired joins |
| White | COMBI WHITE | One NASA Combi polarity-switched conductor | B4 — NC | Consistent with later owner-confirmed NASA R3/B4 pair; old NC retained as historical CB label |
| Brown | COMBI BROWN | Other NASA Combi polarity-switched conductor | R3 — NC | Consistent with later owner-confirmed NASA R3/B4 pair; polarity swaps by SW-001 |
| Green | STEAM + GREEN | Steaming-light positive | B3 — NAV LTS (BOW) | Different labels; branch allocation requires tracing |
| Red | DECK + RED | Deck-light positive | R2 — DECK | Agreement on deck function |
| Black | STEAM DECK − BLACK | Shared return for steaming/deck light functions, as labelled on card | Y3 — NC | Adds evidence for intended common-negative use; physical connection to −12 V busbar remains unverified |
Evidence hierarchy: The owner-confirmed identities of all seven cores and their physical route to the forecabin locker are established. The functional descriptions of blue, yellow and green conflict between the two handwritten cards. We must not represent both simultaneously as a verified electrical circuit, infer that a core changes purpose along a continuous conductor, or conflate a cable’s insulation colour with the colour-coded DIN clamp lever. These differences could reflect different connection locations, revisions or old annotations; none of those explanations is confirmed.
Specific constraints: White and brown are the two reversible-polarity NASA conductors under SW-001 and do not have permanent +/− assignments. The second card labels black as a common negative for the steaming/deck functions only, not the NASA Combi; this does not itself prove the physical negative-busbar connection. The colours written here are seven-core trunk colours only, not the insulated wire colours of the separate Oceanflex 2 × 1.5 mm² NASA mast cable or 3 × 1.5 mm² Osculati mast cable.
The original first-card table and its NC column values above remain unchanged as a separate historical source. The next decisive task is to trace the starboard forecabin locker clamp connections and record which core goes to each outgoing cable.
Reconciliation with previous “seven-core mast cable” notes
Older DC Logical Circuits notes described B2, Y2, Y3 as seven-core mast wires. That was a functional shorthand and is not their direct physical route. These are panel-end cores of the forecabin-bound trunk. The onward mast run begins beyond the forecabin secondary connector distribution.
Superseding owner clarification, 31 October 2026: The NASA Combi’s two switched conductors use R3/brown and B4/white of the 7 × 1.5 mm² Oceanflex distribution trunk, connected through the DC panel’s cage-clamp rail to the DPDT polarity switch SW-001. From the forecabin starboard-locker distribution these connect to the mast’s separate 2 × 1.5 mm² Oceanflex cable (the cable includes a black-insulated core). Which of the two mast-cable cores joins brown or white is not yet recorded. The two NASA conductors are polarity-reversed by SW-001, so neither must be drawn as a permanently earthed/−12 V return.
The handwritten CB column records NC for R3 and B4, while the earlier DPDT sketch mentioned B2/blue and Y3/black as the masthead pair. Retain both as historical annotations superseded by the owner’s latest as-fitted clarification; do not rewrite the photographic transcription. The B2 handwritten MAST HD label remains as a historical function label, but is not proof that the NASA Combi uses B2. The older Y3 black masthead relationship is superseded.
Black return: handwritten functional label, not a traced electrical connection. The second card labels the seven-core black conductor as STEAM DECK − BLACK; the owner also previously proposed black cores associated with a common −12 V busbar. Neither is a continuity measurement. The black core of the seven-core trunk and the black core of the separate 3 × 1.5 mm² Oceanflex steaming/deck mast cable may be connected to that busbar; the actual junctions have not been measured or traced. That hypothesis does not apply to the black core of the 2-core NASA Combi cable, which is part of the polarity-reversing two-wire pair. The 3-core mast cable serves the steaming and deck functions of Osculati EQ-020; do not infer its two positive wire colours from the manufacturer pigtail or the upstream seven-core colour codes.
See DC-NAV-01, DC-NAV-02, DC-NAV-03 and DC-NAV-04 for functional protection.
Next physical survey
Trace the forecabin starboard-locker secondary cage-clamp connectors, record each Oceanflex incoming colour, associated outgoing cables, terminal references, joins/bridges, actual returns and destinations. Until then, panel-end assignment is documented, but end-to-end circuit continuity remains unverified.