Inventory imported from the DC Logical Circuits page; not an as-built survey. The source lists equipment, possible devices and grouped loads. No make, model, wiring rating, physical presence or condition has been independently verified for this register.
This register uses the permanent equipment IDs in the Electrical Reference System. IDs identify equipment, not circuits or panel positions. Legacy physical designations remain as aliases. Circuit-to-protection relationships belong in the Circuit Register, not in the equipment ID.
Index status is generated from each equipment page’s front matter, not maintained here. Mapped (U) means the identity and functional connections have been documented from owner evidence, but the installation has not been independently electrically surveyed. U = identified or owner-confirmed but unverified as-built; T = tentative installation/proposal status; G = grouped equipment, individual count unconfirmed. Documentation progress and physical verification are separate dimensions.
Browse the equipment catalogue for one record per item, with manufacturer references and survey questions.
Current inventory: 82 register records (62 EQ, 4 BB, 6 CB, 3 FU, 4 SW, 3 TB). Four entries represent groups with unknown individual counts; all other records identify one candidate device or subassembly each. Two entries (EQ-057 and EQ-058) were added from the owner’s 31 October 2026 COM-frame clarification.
Sources: DC Logical Circuits (original notes), plus owner-supplied updates on 31 October 2026. See the COM-frame supply and RF overview. Individual equipment IDs are independent of circuit and location IDs; unverified nameplates and electrical values remain open.
DC distribution and controls
House bank upstream source and returns: Source topology models the bank as one port, without implying the previous battery-design options are installed.
| ID | Equipment | Reported location | Status | Source / survey note |
|---|
EQ-059 | House-bank aggregated source interface | House-bank distribution; exact mounting unverified | Mapped (U) | Single logical two-terminal source boundary; internal batteries deferred. Source diagram. |
BB-003 | House-bank positive six-service distribution | House-bank distribution; exact mounting unverified | Mapped (U) | Watchkeeper and pumps 1/2 bypass SW-002; House, Autopilot and Windlass switch together. ANL and battery-post fuses owner-confirmed fitted. Source diagram. |
BB-004 | DIY tinned-copper battery-negative link | House-bank distribution; exact mounting unverified | Mapped (U) | Direct house battery negatives to the battery side of EQ-060 BMV shunt; dimensions not as-built measured. Source diagram. |
EQ-061 | Lewmar HX1 800 W windlass | Foredeck/anchor locker | Mapped (U) | Owner-confirmed fitted motor; DC-WIN-01, 70 A CB-006, separate contactor EQ-062 and two foredeck controls. |
EQ-062 | Windlass contactor | Windlass power/control installation; physical mounting unknown | Mapped (U) | Owner-confirmed separate contactor actuated by two foredeck controls; fitted part number unverified. |
EQ-060 | Victron BMV-712 battery monitor and shunt | House-bank distribution; exact mounting unverified | Mapped (U) | Owner-confirmed monitoring; only battery negatives on shunt battery side, system loads/charging returns on other. Source diagram. |
EQ-001 | Main DC panel (DCP) | Chart table | U | Parent panel assembly; individual breakers recorded separately. |
EQ-002 | NAV LTS four-breaker / yacht-outline panel | CT-P, upper-left Moody panel | Mapped (U) | Four 10 A circuits identified; NAV lighting diagram. |
BB-001 | Main negative busbar | Aft engine-bay frame | U | Legacy alias DC-BB-M; linked to engine block/battery negative according to source; capacity to check. |
BB-002 | DC panel negative busbar | DCP | U | Legacy alias DC-BB-A; source records link to DC-BB-M; legacy cable condition/capacity to check. |
CB-001 | NAV masthead breaker, 10 A | NAV LTS row 1; alias 1,1 | Mapped (U) | Owner confirms 10 A DC-NAV-01 through SW-001 to NASA Combi. |
CB-002 | NAV steaming breaker, 10 A | NAV LTS row 2; alias 1,2 | Mapped (U) | Owner confirms 10 A DC-NAV-02 to Osculati combined fixture. |
CB-004 | 10 A deck-light breaker | NAV LTS row 3 | Mapped (U) | Owner confirms Osculati combined fitting’s deck function, distinct 10 A breaker. DC-NAV-03. |
CB-006 | Windlass fitted 70 A circuit breaker | Aft end of engine drive compartment, beneath aft cabin bunk (owner-confirmed) | Mapped (U) | Fitted, owner-confirmed 70 A circuit breaker on DC-WIN-01; distinct from fitted ANL fusing. |
CB-005 | 10 A bow/stern navigation breaker | NAV LTS row 4 | Mapped (U) | Owner confirms bow bicolour and stern LED both on this 10 A breaker. DC-NAV-04. |
CB-003 | VHF AIS panel circuit breaker — 10 A | CT-P, position 3,4 | Mapped (U) | Panel feeder breaker to COM frame; see DC-COM-01 for protection and outstanding checks. |
SW-003 | Foredeck windlass control switch A | Foredeck; exact position to survey | Mapped (U) | One of two owner-confirmed foredeck windlass switches commanding EQ-062; direction unassigned. |
SW-004 | Foredeck windlass control switch B | Foredeck; exact position to survey | Mapped (U) | Second owner-confirmed foredeck windlass switch commanding EQ-062; direction unassigned. |
SW-002 | House/Autopilot/Windlass shared remote battery switch | House-bank positive distribution; physical device location unverified | Mapped (U) | One common switching device for House, Autopilot and Windlass; Watchkeeper and both pumps bypass. WhisperPower family visible in Aug 2025 image, exact installed model unknown. |
SW-001 | Masthead DPDT polarity-reversing selector | Exact mounting unconfirmed | Mapped (U) | Owner confirms NASA Combi tricolour/anchor mode selection, SW-001 in DC-NAV-01; pinout untested. |
TB-001 | DIN Y/R/B cage-clamp group 2 | Behind DCP | U | Owner-confirmed positional convention: Y2/R2/B2 are three individual clamps; Y2 steaming, B2 NASA masthead from legacy notes; wiring not traced. |
TB-002 | DIN Y/R/B cage-clamp group 3 | Behind DCP | U | Owner-confirmed positional convention: Y3/R3/B3 are three individual clamps; Y3 routes black mast conductor per legacy notes; wiring not traced. |
TB-003 | Four-way connector block | Unsurveyed | U | Source notes a 4-way connector on the DPDT 2 to DC-BB-A path; verify identity/location. |
Communications
| ID | Equipment | Reported location | Status | Source / survey note |
|---|
EQ-003 | Icom IC-M510 VHF transceiver | SL-COM — COM frame (saloon, starboard-forward) | Mapped (U) | COM-frame VHF; see DC and RF connections and the equipment record for open survey items. |
EQ-004 | Ocean Signal ATB1 AIS transponder | SL-COM — COM frame (saloon, starboard-forward) | Mapped (U) | COM-frame AIS; see DC and RF connections and the equipment record for open survey items. |
EQ-005 | Digital Yacht SPL2000 AIS/VHF splitter (owner-confirmed) | SL-COM — COM frame (saloon, starboard-forward) | Mapped (U) | COM-frame antenna splitter; see DC and RF connections and the equipment record for open survey items. |
EQ-057 | COM-frame four-way FC fuse board | SL-COM — COM frame (saloon, starboard-forward) | Mapped (U) | COM-frame fused distribution; see DC diagram and the equipment record for fuse-board survey items. |
FU-001 | COM-frame fuse way 1, 10 A, Icom M510 VHF | SL-COM, EQ-057 way 1 | Mapped (U) | COM-frame VHF branch; see DC-COM-02 and the equipment record for fuse type and wiring. |
FU-002 | COM-frame fuse way 2, 3 A, Digital Yacht SPL2000 | SL-COM, EQ-057 way 2 | Mapped (U) | COM-frame SPL2000 branch; see DC-COM-03 and the equipment record for fuse type and wiring. |
FU-003 | COM-frame fuse way 3, 3 A, Ocean Signal ATB1 | SL-COM, EQ-057 way 3 | Mapped (U) | COM-frame ATB1 branch; see DC-COM-04 and the equipment record for fuse type and wiring. |
EQ-058 | Vesper Marine VA159 masthead VHF/AIS antenna | MS-T — masthead | Mapped (U) | Masthead VHF/AIS antenna; see RF diagram and the equipment record for measurement backlog. |
Charging outlets / devices
Topside and navigation lighting
Fresh-water equipment
Bilge equipment
| ID | Equipment | Reported location | Status | Source / survey note |
|---|
EQ-030 | Bilge pump A | Bilge (exact position unsurveyed) | T | Bracketed [Pump A]; location and physical identity to confirm. |
EQ-031 | Bilge pump B | Bilge (exact position unsurveyed) | T | Bracketed [Pump B]; location and physical identity to confirm. |
Engine-compartment equipment
Local area network
Wide area network
Entertainment
| ID | Equipment | Reported location | Status | Source / survey note |
|---|
EQ-044 | TV | Unsurveyed | U | Source: TV. |
EQ-045 | Radio / media player | Unsurveyed | T | Bracketed [Radio/Media Player]; presence unconfirmed. |
Interior and compartment lighting
Outstanding distinctions and survey actions
- The combined masthead anchor/tricolour lamp is one physical item with two modes, not two independent lights. The steering, navigation and electrical circuits should link to its single equipment ID.
- NMEA2000 A and NMEA2000 B are two segments of one NMEA 2000 network, with power injection for both behind DCP (owner-confirmed, 6 November 2026), not individual devices or two established separate networks. See the network and power record. A power isolator (EQ-063) passes CAN data and separates the segment positive supplies (owner-confirmed). The common 10 A NAV INSTR breaker is CB-007. Local protection, detailed supply wiring, isolator model/location, backbone components and connected instruments remain to be documented; no fictitious equipment records have been created for the segment labels.
- Seven-core cable and conductor colours describe wiring, not equipment. The source gives blue, black and yellow cores for particular lighting paths; retain these in a future Circuit Register without turning each conductor into equipment.
- The source refers to a battery negative and an engine block as return connection points but does not identify an individual battery or complete engine. Do not allocate a battery/engine asset ID from those incidental references until surveyed.
- Verify whether the navigation-lights illuminated panel section and the four-way connector are distinct serviceable components, and whether terminal aliases
B2, Y2 and Y3 map to the assumed DIN block numbers. Preserve physical aliases even if the interpretation changes. - Identify each downlight and deck light individually, confirm tentative bracketed entries, capture physical locations, models, serials and photographs, and record survey dates before marking anything as verified.
NMEA 2000 network hardware