BB-001 — Main negative busbar
← Equipment Register · Browse equipment
Survey status: Listed, not physically verified. This record originates from the older DC Logical Circuits notes. It is not a verified-as-built electrical drawing. Model specifications are manufacturer reference information, not measured onboard data.
Identity and location
| Field | Value |
|---|---|
| Permanent equipment ID | BB-001 |
| Equipment | Main negative busbar |
| Register category | DC distribution and controls |
| Equipment class | BB |
| Reported location | Aft engine-bay frame |
| Inventory state | Listed, not physically verified |
| Manufacturer / model | Not identified; owner survey required |
| Serial / part number | Not recorded |
| Last onboard verification | Not recorded |
Original reference and notes: Legacy alias DC-BB-M; linked to engine block/battery negative according to source; capacity to check.
Electrical installation — as fitted
| Field | Surveyed value |
|---|---|
| Supply voltage / input | Not measured or recorded |
| Source / distribution busbar | Not established |
| Circuit identifier | Not allocated; do not confuse this equipment ID with a circuit ID |
| Primary branch protective device | Not confirmed |
| Upstream protective device | Not confirmed |
| Cable / terminal references | See source notes and connections below; unverified until traced |
| Cable size, fuse/breaker rating and measured load | Not recorded |
Important: a device’s manufacturer-rated input, current or recommended fuse is not proof of the actual cable, protection or wiring aboard Ragtime.
Known or reported relationships
BB-002— DC-panel negative busbar; upstream return connection reported, not electrically surveyed
Manufacturer reference
Make and model not yet reliably established. Manufacturer electrical specifications and the applicable PDF user/installation manual cannot safely be selected until the owner confirms the model.
Documentation: No model-specific PDF manual linked yet.
Information requested from the owner
- Is this item currently installed, removed or planned? When was it last physically checked?
- Please give its maker/type, pole count, stud size, rated current, cable terminations and photograph.
- Which supply circuit, branch fuse/breaker and any upstream protective device feed it, and what are their actual ratings?
Record maintenance
- Evidence basis: existing website inventory, plus explicitly identified manufacturer references where applicable.
- Verification: pending physical survey; photograph, nameplate data and protective-device references to be recorded.
- Avoid publishing passwords, SIM identifiers, access tokens or other confidential credentials on this public site.
House-bank negative return interface (latest owner report)
The house-bank negative port connects through bespoke DIY tinned-copper battery-side busbar BB-004 to the Victron BMV-712 shunt EQ-060. All house load and charging returns belong on the system/load side of the shunt. This legacy BB-001 main negative bus is a likely common distribution point, but its actual onward cable/terminal connection from the shunt has not yet been traced. Do not assume the engine-block bond or negative bypass arrangement is independently verified.
The older DC-BB-M source note remains a separate historical record; the BMV shunt arrangement is owner-confirmed as a distinct physical upstream measurement boundary. House-bank functional topology.