CB-001 — Masthead-light circuit breaker

← Equipment Register · Browse equipment

Status: photo and owner confirmation, not an electrical test. NAV LTS breaker at panel row 1, 10 A owner-confirmed, supplying NASA Combi tricolour/anchor via SW-001 via DC-NAV-01. The engraved label is visible in the owner’s photograph, but the breaker-body rating, terminals and wires have not been inspected.

Identity and location

FieldValue
Permanent equipment IDCB-001
EquipmentMasthead-light circuit breaker
Register categoryDC distribution and controls
Equipment classCB
Reported locationDCP, position 1,1
Inventory stateOwner confirms 10 A rating, row 1, and protected lighting function; internal wiring not tested
Manufacturer / modelOriginal Moody NAV LTS panel breaker, exact make/type unknown
Serial / part numberNot recorded
Last onboard verificationNot recorded

Original reference and notes: Physical alias Breaker 1,1; source traces to DPDT selector; rating unknown.

Electrical installation — as fitted

FieldSurveyed value
Supply voltage / inputNot measured or recorded
Source / distribution busbarNot established
Circuit identifierDC-NAV-01
Primary branch protective deviceThis fitted breaker, 10 A, owner-confirmed
Upstream protective deviceNot confirmed
Cable / terminal referencesSee source notes and connections below; unverified until traced
Cable size, fuse/breaker rating and measured loadBreaker 10 A (owner report); cable size and load measurement unverified

Important: a device’s manufacturer-rated input, current or recommended fuse is not proof of the actual cable, protection or wiring aboard Ragtime.

Known or reported relationships

  • SW-001 — masthead mode selector downstream in source notes
  • EQ-021 — masthead lamp load

Manufacturer reference

Make and model not yet reliably established. Manufacturer electrical specifications and the applicable PDF user/installation manual cannot safely be selected until the owner confirms the model.

Documentation: No model-specific PDF manual linked yet.

Information requested from the owner

  1. Breaker 10 A and masthead function are owner-confirmed; inspect the body for make, voltage, breaking capacity and trip characteristic.
  2. Trace actual load-side wiring to SW-001 and legacy DIN clamp connector points, including return conductors.

Record maintenance

  • Evidence basis: existing website inventory, plus explicitly identified manufacturer references where applicable.
  • Verification: pending physical survey; photograph, nameplate data and protective-device references to be recorded.
  • Avoid publishing passwords, SIM identifiers, access tokens or other confidential credentials on this public site.