EQ-018 — Osculati bow bicolour LED navigation light

← Equipment Register · Browse equipment

Owner-confirmed fitted equipment and circuit role, not independently tested. Osculati bow bicolour LED navigation light, fed through the original Moody NAV LTS panel. Exact installed model suffix, conductor sizes and electrical measurements are not available. Navigation-light system.

Identity and location

FieldValue
Permanent equipment IDEQ-018
EquipmentBow navigation light
Register categoryTopside and navigation lighting
Equipment classEQ
Reported locationBow
Inventory stateFitted manufacturer/function owner-confirmed; model suffix and circuit wiring unverified
Manufacturer / modelOsculati bow bicolour LED navigation light; exact manufacturer part number unconfirmed
Serial / part numberNot recorded
Last onboard verificationNot recorded

Original reference and notes: Source: Bow.

Electrical installation — as fitted

FieldSurveyed value
Supply voltage / inputNot measured or recorded
Source / distribution busbarNot established
Circuit identifierDC-NAV-04
Primary branch protective deviceCB-005 10 A (owner-confirmed)
Upstream protective deviceNot confirmed
Cable / terminal referencesSee source notes and connections below; unverified until traced
Cable size, fuse/breaker rating and measured loadCircuit breaker 10 A owner-confirmed; cable size and load current not measured

Important: a device’s manufacturer-rated input, current or recommended fuse is not proof of the actual cable, protection or wiring aboard Ragtime.

Known or reported relationships

CB-005 protects DC-NAV-04 feeding both EQ-018 bow bicolour and EQ-019 stern LED. The owner-provided handwritten schedule now identifies B3 → green core of Oceanflex 7 × 1.5 mm² from the main DC panel to the forecabin starboard locker, labelled NAV LTS (Bow). Downstream connectors, actual bow-light branch and returns remain untraced. Panel connector schedule.

Manufacturer reference

Osculati is owner-confirmed as the manufacturer, and the bow fitting is a bicolour LED. The exact part number and therefore the specific PDF manual/ratings are not yet established. Osculati catalogues are reference sources, not evidence of the fitted model.

Information requested from the owner

  1. Confirm the Osculati bow bicolour LED part number and fitting condition when accessible.
  2. Trace the branch from 10 A CB-005 through its DIN connector to the bow, including any junction to the stern and return conductor.

Record maintenance

  • Evidence basis: existing website inventory, plus explicitly identified manufacturer references where applicable.
  • Verification: pending physical survey; photograph, nameplate data and protective-device references to be recorded.
  • Avoid publishing passwords, SIM identifiers, access tokens or other confidential credentials on this public site.