EQ-038 — Odroid N2 computer
← Equipment Register · Browse equipment
Survey status: Listed, not physically verified. This record originates from the older DC Logical Circuits notes. It is not a verified-as-built electrical drawing. Model specifications are manufacturer reference information, not measured onboard data.
Identity and location
| Field | Value |
|---|---|
| Permanent equipment ID | EQ-038 |
| Equipment | Odroid N2 computer |
| Register category | Local area network |
| Equipment class | EQ |
| Reported location | Unsurveyed |
| Inventory state | Listed, not physically verified |
| Manufacturer / model | Hardkernel ODROID-N2 single-board computer (source spelling; verify N2 versus N2+ revision) |
| Serial / part number | Not recorded |
| Last onboard verification | Not recorded |
Original reference and notes: Source: Odroid N2.
Electrical installation — as fitted
| Field | Surveyed value |
|---|---|
| Supply voltage / input | Not measured or recorded |
| Source / distribution busbar | Not established |
| Circuit identifier | Not allocated; do not confuse this equipment ID with a circuit ID |
| Primary branch protective device | Not confirmed |
| Upstream protective device | Not confirmed |
| Cable / terminal references | See source notes and connections below; unverified until traced |
| Cable size, fuse/breaker rating and measured load | Not recorded |
Important: a device’s manufacturer-rated input, current or recommended fuse is not proof of the actual cable, protection or wiring aboard Ragtime.
Known or reported relationships
No other equipment-level relationships have yet been established in the register.
Manufacturer reference
Identification confidence: ODROID N2 explicitly listed; exact board revision unverified.
- Manufacturer recommends a 12 V / 2 A supply for the ODROID-N2 family.
- Manufacturer-specified compatible power-adapter connector: 5.5 mm outer diameter, 2.1 mm centre-positive barrel jack.
- Manufacturer’s documentation distinguishes the original N2 from the N2+ and production revisions; confirm the board marking before recording an allowed voltage range or power budget.
Documentation
- Hardkernel N2+ specifications (revision comparison; not proof this unit is N2+)
- Hardkernel compatible 12 V/2 A adapter specification
- Hardkernel ODROID-N2 technical wiki (online manual)
Information requested from the owner
- Is this item currently installed, removed or planned? When was it last physically checked?
- What are its manufacturer, model/part number and serial number (if recorded)? Please provide a nameplate photograph.
- Where exactly is it mounted? A photo with surroundings would help.
- Which supply circuit, branch fuse/breaker and any upstream protective device feed it, and what are their actual ratings?
- Is the board an original ODROID-N2 or N2+? What is its actual supply voltage and power adapter?
Record maintenance
- Evidence basis: existing website inventory, plus explicitly identified manufacturer references where applicable.
- Verification: pending physical survey; photograph, nameplate data and protective-device references to be recorded.
- Avoid publishing passwords, SIM identifiers, access tokens or other confidential credentials on this public site.