EQ-040 — TRB500 mobile network device
← Equipment Register · Browse equipment
Survey status: Listed, not physically verified. This record originates from the older DC Logical Circuits notes. It is not a verified-as-built electrical drawing. Model specifications are manufacturer reference information, not measured onboard data.
Identity and location
| Field | Value |
|---|---|
| Permanent equipment ID | EQ-040 |
| Equipment | TRB500 mobile network device |
| Register category | Wide area network |
| Equipment class | EQ |
| Reported location | Unsurveyed |
| Inventory state | Listed, not physically verified |
| Manufacturer / model | Teltonika Networks TRB500 industrial 5G gateway |
| Serial / part number | Not recorded |
| Last onboard verification | Not recorded |
Original reference and notes: Source: TRB500; associated 30 W PoE injector.
Electrical installation — as fitted
| Field | Surveyed value |
|---|---|
| Supply voltage / input | Not measured or recorded |
| Source / distribution busbar | Not established |
| Circuit identifier | Not allocated; do not confuse this equipment ID with a circuit ID |
| Primary branch protective device | Not confirmed |
| Upstream protective device | Not confirmed |
| Cable / terminal references | See source notes and connections below; unverified until traced |
| Cable size, fuse/breaker rating and measured load | Not recorded |
Important: a device’s manufacturer-rated input, current or recommended fuse is not proof of the actual cable, protection or wiring aboard Ragtime.
Known or reported relationships
EQ-041— 30 W injector listed alongside TRB500; exact role unverified
Manufacturer reference
Identification confidence: Model explicitly recorded in the source page; installation not independently surveyed.
- Manufacturer input: 9–30 V DC via a 4-pin industrial connector.
- Manufacturer datasheet lists idle consumption under 3 W and maximum under 6 W.
- One gigabit Ethernet port; the source page refers to a separate 30 W PoE injector. Do not assume that the TRB500 itself accepts IEEE PoE: verify the exact injector, splitter and cable arrangement.
Documentation
- Teltonika TRB500 product
- TRB500 manufacturer’s powering manual (online)
- TRB500 manufacturer datasheet (PDF; distributor-hosted copy)
Information requested from the owner
- Is this item currently installed, removed or planned? When was it last physically checked?
- What are its manufacturer, model/part number and serial number (if recorded)? Please provide a nameplate photograph.
- Where exactly is it mounted? A photo with surroundings would help.
- Which supply circuit, branch fuse/breaker and any upstream protective device feed it, and what are their actual ratings?
- How is the TRB500 supplied from the 30 W PoE arrangement, if at all? Which exact adapter/splitter?
Record maintenance
- Evidence basis: existing website inventory, plus explicitly identified manufacturer references where applicable.
- Verification: pending physical survey; photograph, nameplate data and protective-device references to be recorded.
- Avoid publishing passwords, SIM identifiers, access tokens or other confidential credentials on this public site.