EQ-042 — Starlink terminal
← Equipment Register · Browse equipment
Survey status: Listed, not physically verified. This record originates from the older DC Logical Circuits notes. It is not a verified-as-built electrical drawing. Model specifications are manufacturer reference information, not measured onboard data.
Identity and location
| Field | Value |
|---|---|
| Permanent equipment ID | EQ-042 |
| Equipment | Starlink terminal |
| Register category | Wide area network |
| Equipment class | EQ |
| Reported location | Unsurveyed |
| Inventory state | Listed, not physically verified |
| Manufacturer / model | Starlink Mini (candidate from owner’s earlier Ragtime equipment notes; confirm device generation) |
| Serial / part number | Not recorded |
| Last onboard verification | Not recorded |
Original reference and notes: Source: Starlink; associated 150 W PoE injector.
Electrical installation — as fitted
| Field | Surveyed value |
|---|---|
| Supply voltage / input | Not measured or recorded |
| Source / distribution busbar | Not established |
| Circuit identifier | Not allocated; do not confuse this equipment ID with a circuit ID |
| Primary branch protective device | Not confirmed |
| Upstream protective device | Not confirmed |
| Cable / terminal references | See source notes and connections below; unverified until traced |
| Cable size, fuse/breaker rating and measured load | Not recorded |
Important: a device’s manufacturer-rated input, current or recommended fuse is not proof of the actual cable, protection or wiring aboard Ragtime.
Known or reported relationships
EQ-043— 150 W injector listed alongside Starlink; exact role unverified
Manufacturer reference
Identification confidence: Candidate identification; the DC Logical Circuits source only says Starlink.
- Starlink Mini manufacturer sheet lists 12–48 V DC, 60 W input rating and typical average consumption of 25–40 W.
- Starlink’s optional USB-C PD power path calls for a 100 W, 20 V/5 A source (with the designated accessory).
- An independent 150 W PoE injector is listed in Ragtime’s source notes; this is not proof of compatibility or of the Mini’s actual onboard power architecture. Confirm hardware, connector, voltage and injector/splitter models.
Documentation
- Starlink Mini manufacturer specification sheet (PDF)
- Starlink Mini setup/installation guide (PDF)
- Starlink Mini manufacturer’s installation guidance
Information requested from the owner
- Is this item currently installed, removed or planned? When was it last physically checked?
- What are its manufacturer, model/part number and serial number (if recorded)? Please provide a nameplate photograph.
- Where exactly is it mounted? A photo with surroundings would help.
- Which supply circuit, branch fuse/breaker and any upstream protective device feed it, and what are their actual ratings?
- Is the fitted terminal a Starlink Mini? How is its DC supply adapted and protected?
Record maintenance
- Evidence basis: existing website inventory, plus explicitly identified manufacturer references where applicable.
- Verification: pending physical survey; photograph, nameplate data and protective-device references to be recorded.
- Avoid publishing passwords, SIM identifiers, access tokens or other confidential credentials on this public site.