EQ-057 — COM-frame four-way FC fuse board

← Equipment Register · COM-frame overview

Status: Owner-confirmed installed fuse board and branch ratings; conductor protection not independently inspected. EQ-057 is fed from the original Moody DC panel through 10 A CB-003. Owner confirms way 1 = 10 A VHF, way 2 = 3 A SPL2000, way 3 = 3 A ATB1. The purpose of way 4 and the physical fuse formats remain unknown.

Identity and location

FieldValue
Equipment IDEQ-057
FunctionFour-way fused DC branch distribution for communications equipment
Owner’s label“4 way FC fuse board” (FC expansion/manufacturer unverified)
Make/model and serialNot recorded
Location codeSL-COM — COM frame, starboard-forward saloon adjacent to DC panel
StateOwner-confirmed installed; electrical details unverified
Verification evidenceOwner description, 31 October 2026; photo/nameplate not supplied

Supply, protection and loads

ItemOwner-reported relationshipSurvey status
FeederDC-COM-01 from CB-003, 10 A, 3,4, VHF AISOwner-confirmed; conductor and return path not inspected
Way 1FU-001 — 10 A, protects DC-COM-02 to EQ-003 Icom M510 VHFOwner-confirmed position and rating; fuse type / conductor unknown
Way 2FU-002 — 3 A, protects DC-COM-03 to EQ-005 Digital Yacht SPL2000Owner-confirmed position and rating; fuse type / conductor unknown
Way 3FU-003 — 3 A, protects DC-COM-04 to EQ-004 Ocean Signal ATB1 AISOwner-confirmed position and rating; fuse type / conductor unknown
Fourth wayUnknown (may be spare or another load)Not confirmed

Equipment allocation: EQ-057 identifies the four-way assembly; FU-001, FU-002 and FU-003 identify its three confirmed installed fuses. They protect DC-COM-02, DC-COM-03 and DC-COM-04 respectively. The fourth physical way remains unidentified; do not allocate a fourth FU equipment ID until its occupancy is established.

Electrical reference

  • Nominal onboard DC distribution; the feeder breaker is 10 A and the branch fuses are 10 A, 3 A and 3 A, all owner-confirmed. Board manufacturer/rating, fuse formats and actual conductor protection remain unverified. Way 1 and upstream CB-003 both have nominal 10 A ratings; selective operation must not be assumed.
  • Do not infer conductor protection from the manufacturer ratings of the three connected loads.
  • The main panel is planned for replacement during the winter 2026–27 refit; the feeder/protection interface should be revisited as part of that work.
  • COM-frame functional DC and RF topology (includes the linked distribution diagram).
  • Circuit Register gives the circuit and protection mapping.

Manual: No model-specific PDF manual identified until the fuse board manufacturer and model are confirmed.

Information requested from the owner

  1. What does the board’s label say? A photo of the fuse carrier and rear wiring would establish the FC manufacturer/model.
  2. Ways and nominal ratings are now identified; photograph the fitted fuse types/manufacturers and conductors when convenient.
  3. Is way four spare or feeding another load?
  4. CB-003 supplies this board, owner-confirmed. Trace and record the feeder/return conductor sizes, terminals and routing.

Record maintenance

  • Source: owner’s COM-frame description, 31 October 2026.
  • Feeder CB-003 and branch ways/rating assignments 1: VHF 10 A; 2: SPL2000 3 A; 3: ATB1 3 A owner-confirmed, 31 October 2026. Fuse format, physical conductors and branch protection coordination remain to survey.