EQ-062 — Windlass contactor
← Equipment Register · Windlass equipment EQ-061 · Power circuit · Control circuit
Owner confirms one separate installed contactor for the Lewmar HX1 800 W. Two individual foredeck switches control this contactor. The installed contactor’s manufacturer/model, rated current, coil voltage, terminal scheme and physical mounting location remain unidentified.
Control and power relationships
| Connection | Evidence |
|---|---|
| Equipment | EQ-062 — separate windlass contactor |
| Load/power output | To the Lewmar HX1 800 W, EQ-061 motor; as-wired motor terminals and polarity not continuity-tested |
| Power feed | DC-WIN-01 through common house/windlass remote switch SW-002 and fitted 70 A breaker CB-006; exact contactor/fuse sequence not traced |
| Control input 1 | SW-003, foredeck switch A; actual terminal and UP/DOWN function unconfirmed |
| Control input 2 | SW-004, foredeck switch B; actual terminal and UP/DOWN function unconfirmed |
| Control-path record | DC-WIN-02; actual supply source and control fuse still unknown |
| Fitted manufacturer/model | Unknown; do not infer it is Lewmar part 68000939 solely from the HX1 manual |
| Physical position | Not yet documented by photo/measurement |
Manufacturer wiring reference
The Lewmar HX1 manual, Issue 2 shows a manufacturer-supplied contactor, part 68000939, with UP/DOWN switching and a 3 A control fuse in the standard circuit. This is a useful model to verify against Ragtime’s installation, not confirmation of the installed contactor part, fuse rating, foredeck control hardware or coil arrangement.
Outstanding survey
Photograph contactor markings and terminals; identify battery/power contacts, motor contacts and control inputs; trace the two foredeck control wires, control protection, switch directions and any alternative control stations.