FU-001 — COM-frame fuse way 1, 10 A, Icom M510 VHF
← Equipment Register · COM fuse board · Circuit Register
Owner-confirmed installed fuse position, rating and protected equipment. Physical fuse format, make, condition and conductor size have not been independently surveyed.
| Field | Confirmed record |
|---|---|
| Permanent fuse ID | FU-001 |
| Physical assembly | EQ-057 four-way fuse board |
| Location | SL-COM — COM frame |
| Physical position / way | 1 (owner numbering) |
| Installed fuse rating | 10 A (owner-confirmed) |
| Protected branch circuit | DC-COM-02 |
| Load | EQ-003 — Icom M510 VHF |
| Upstream protection | CB-003 10 A, through feeder DC-COM-01 |
| Fuse type, time-current curve and manufacturer | Not recorded |
| Branch cable cross-section, length and return | Not recorded |
Protection distinction: FU-001 protects the DC-COM-02 branch conductor; CB-003 protects the upstream DC-COM-01 feeder. Coordination/discrimination and cable adequacy have not yet been assessed.
Review at winter refit: This branch’s 10 A fuse is rated the same as its upstream 10 A breaker. That does not demonstrate selective tripping; check actual fuse and breaker characteristics and supply conductor sizing before specifying replacement protection.
Survey backlog
Record the fitted fuse format and manufacturer, actual conductor size, supply/return wiring, and check appropriate protection coordination when the DC panel is replaced.
Record maintenance
- Evidence: owner’s numbered fuse board inventory, 31 October 2026: way 1, 10 A, Icom M510 VHF.
- This is an owner-confirmed as-installed inventory, not a physical wiring inspection or electrical compliance assessment.