TB-002 — DIN cage-clamp connector group 3

← Equipment Register · Connector naming convention · Navigation-light circuits

Physical grouping and connector naming owner-confirmed; panel-end cable-core identities now supported by the owner’s photographed handwritten schedule, but the electrical connections have not been independently continuity-traced. These are individual generic cage-clamp connectors, arranged as a physical group with lever colours Yellow → Red → Blue behind the DC panel. The earlier rail photograph is incomplete. The owner has now also supplied a handwritten connector schedule identifying the panel-end cores of an Oceanflex 7 × 1.5 mm² cable to the forecabin starboard locker. That newer source establishes conductor assignments, not continuity or the physical onward branch topology. Schedule.

Identity and physical references

FieldRecorded information
Equipment documentation IDTB-002
Function of this recordPhysical connector group 3, not a single electrically common three-way terminal
LocationBehind original main DC panel, CT-R (chart-table panel rear)
Three individual connectorsY3, R3, B3 — distinct colour-lever clamp positions
Group sequenceRepeating Yellow / Red / Blue connectors; group 3 counted from the top
Make and modelGeneric Chinese cage-clamp connectors; specific manufacturer/model and ratings unknown
Survey statusOwner confirms physical naming/grouping, no photo of complete rail and no independent continuity measurements

Naming rule: The letter is the lever colour and the digit is the group ordinal. It is not the colour of the attached wire, nor an identifier for a three-way electrically linked assembly. Do not assume these three positions are bridged.

Handwritten panel-end allocations (not independently continuity-tested)

Clamp aliasOriginal wiring noteStatus
Y3 (yellow lever)Black core of Oceanflex 7 × 1.5 mm² forecabin trunk; original CB column NC, older DPDT notes associated with NASA mastheadOlder NASA association superseded by owner-confirmed R3/B4 switched pair; second handwritten card labels black STEAM DECK −; physical negative-busbar continuity unverified
R3 (red lever)Brown core of Oceanflex 7 × 1.5 mm² forecabin trunk, original CB-column NCOwner-confirmed one of two NASA Combi switched wires, via SW-001, paired with B4/white; individual mast cable core mapping untraced
B3 (blue lever)Green core of Oceanflex 7 × 1.5 mm² forecabin trunk; handwritten NAV LTS (Bow)Panel-end bow allocation documented; actual bow connection not traced

This is an indexed physical reference, not a verified as-fitted wiring test. The panel-end conductor identities come from the owner’s handwritten schedule, with functional descriptions also preserved from the older DC Logical Circuits notes. The photo of the rail is incomplete, and the downstream locker distribution has not been traced.

Information still needed

  • Identify the actual conductor occupying each referenced clamp and any bridging/jumper arrangement; no connection is assumed for unnamed clamps.
  • Record any conductor cross-section, clamp manufacturer/type/current rating and terminals during access to the back of the DC panel.
  • Trace R3/brown together with B4/white through SW-001, the forecabin starboard-locker connectors and separate 2 × 1.5 mm² NASA mast cable. Trace Y3/black separately against the assumed common negative busbar; the original NC is preserved as an old CB-column label. Handwritten panel schedule.

Record maintenance

  • 31 October 2026: owner confirmed repeated Y/R/B individual cage-clamp groups and <lever colour><group number> notation. Photo supplied is incomplete.
  • Existing mast conductor and device relationships remain legacy-noted, not electrically verified.