TB-003 — Four-way connector block

← Equipment Register · Browse equipment

Survey status: Listed, not physically verified. This record originates from the older DC Logical Circuits notes. It is not a verified-as-built electrical drawing. Model specifications are manufacturer reference information, not measured onboard data.

Identity and location

FieldValue
Permanent equipment IDTB-003
EquipmentFour-way connector block
Register categoryDC distribution and controls
Equipment classTB
Reported locationUnsurveyed
Inventory stateListed, not physically verified
Manufacturer / modelNot identified; owner survey required
Serial / part numberNot recorded
Last onboard verificationNot recorded

Original reference and notes: Source notes a 4-way connector on the DPDT 2 to DC-BB-A path; verify identity/location.

Electrical installation — as fitted

FieldSurveyed value
Supply voltage / inputNot measured or recorded
Source / distribution busbarNot established
Circuit identifierNot allocated; do not confuse this equipment ID with a circuit ID
Primary branch protective deviceNot confirmed
Upstream protective deviceNot confirmed
Cable / terminal referencesSee source notes and connections below; unverified until traced
Cable size, fuse/breaker rating and measured loadNot recorded

Important: a device’s manufacturer-rated input, current or recommended fuse is not proof of the actual cable, protection or wiring aboard Ragtime.

Known or reported relationships

  • SW-001 — selector terminal 2
  • BB-002 — reported DC-BB-A connection

Manufacturer reference

Make and model not yet reliably established. Manufacturer electrical specifications and the applicable PDF user/installation manual cannot safely be selected until the owner confirms the model.

Documentation: No model-specific PDF manual linked yet.

Information requested from the owner

  1. Is this item currently installed, removed or planned? When was it last physically checked?
  2. Please give its exact DIN position, manufacturer/type, rated current, terminal numbering and photograph.
  3. Where exactly is it mounted? A photo with surroundings would help.
  4. Which supply circuit, branch fuse/breaker and any upstream protective device feed it, and what are their actual ratings?
  5. Does a distinct four-way connector actually exist on the DC-BB-A path?

Record maintenance

  • Evidence basis: existing website inventory, plus explicitly identified manufacturer references where applicable.
  • Verification: pending physical survey; photograph, nameplate data and protective-device references to be recorded.
  • Avoid publishing passwords, SIM identifiers, access tokens or other confidential credentials on this public site.