Navigation and deck-light circuits
← Electrical configuration · Equipment Register · Circuit Register
Evidence: four breaker functions and 10 A ratings owner-confirmed (31 October 2026), but electrical wiring and breaker body markings not independently inspected. The photograph shows four labelled controls in the upper-left NAV LTS assembly of the original Moody 336 DC panel.
Functional DC distribution
One Osculati housing EQ-020 appears in two branches because its steaming and deck functions have separate breakers. Bow and stern fittings share CB-005. Each breaker is 10 A by owner declaration; cable, returns and DIN clamp connections remain untested.
The NAV LTS panel is EQ-002, part of main Moody DC panel EQ-001. The yacht-outline mimic and its indicator dots are present on the faceplate, but their actual status feedback/illumination circuit has not been verified.
Confirmed equipment functions
- Masthead: CB-001, 10 A, supplies SW-001 DPDT On-Off-On polarity-reversing selector and the NASA Marine Combi LED. Owner-confirmed switched pair: R3/brown and B4/white in the 7 × 1.5 mm² trunk, continuing from the forecabin locker into a separate 2 × 1.5 mm² Oceanflex mast cable. Both are polarity-switched; neither conductor is a permanent negative return. Exact 2-core wire-to-trunk colour matching and switch pin truth table remain untraced.
- Steaming: CB-002, 10 A, supplies the forward-white function of Osculati 13.243.88 EQ-020. The handwritten schedule establishes Y2 → yellow Oceanflex seven-core trunk conductor to the forecabin locker; the separate mast-going cable and fitting pigtail junction remain untraced.
- Deck: CB-004, 10 A, independently feeds the four-LED deck function in the same EQ-020 housing. New handwritten source: R2 → red Oceanflex trunk conductor; onward forecabin junction and mast leg remain untraced.
- Bow and stern: CB-005, 10 A, supplies EQ-018 bow bicolour and EQ-019 stern light. Handwritten references identify B3 → green Oceanflex trunk core (bow) and B1 → stern-light-labelled connector, but the stern prefix is not fully legible and the separate routes have not been continuity-traced.
The owner has supplied a handwritten connector schedule identifying all seven core colours in one Oceanflex 7 × 1.5 mm² trunk, running from the DC-panel rail to the forecabin starboard locker. A second set of similar cage-clamp connectors distributes the cable into separate runs for bow/forecabin, returns toward the saloon and routes through the swan neck to mast lighting. The seven-core trunk does not run directly to the mast. The branches use original DIN-rail mounted generic cage-clamp connectors, arranged into repeated Yellow → Red → Blue groups. A code like B2 names the blue-lever connector in group 2, not a blue wire or the second terminal on a common connector assembly. Naming convention. The supplied connector photograph is partial; actual branch assignments beyond the legacy entries below remain untraced.
Legacy terminal notes, retained as references
| Historical reference | Reported function | Status |
|---|---|---|
| Breaker 1,1 | Masthead to DPDT selector | Owner confirms function and 10 A breaker; physical terminal alias retained |
| Selector pins 1–6 | Polarity-reversing masthead supply | Legacy pin notes only; contact map not independently tested |
B2 blue lever | 7× blue trunk core, original handwriting MAST HD | Original label retained; superseded as NASA Combi switched pair by owner-confirmed R3/B4 |
Y2 yellow lever | 7× yellow core, handwritten STEAM. | Panel-end allocation; onward mast leg untraced |
R2 red lever | 7× red core, handwritten DECK | New owner handwriting; onward mast leg untraced |
B3 blue lever | 7× green core, handwritten NAV LTS (Bow) | Forecabin-bound trunk; actual bow wiring untraced |
Y3 yellow lever | 7× black core, CB column NC; older DPDT notes mention NASA | Older NASA link superseded; separate hypothesis of common −12 V return not verified |
R3 red lever | 7× brown core, CB column NC | Owner-confirmed NASA Combi switched conductor, via SW-001; original NC label retained |
B4 blue lever | 7× white core, CB column NC | Owner-confirmed NASA Combi switched conductor, via SW-001; original NC label retained |
B1 blue lever | “RG STERN LT”, prefix unclear | Stern-light label in handwritten notes; cable route untraced |
Second handwritten trunk-core allocation — cross-check
The owner confirms the colours on a second handwritten card are the seven-core Oceanflex trunk insulation colours. This is a separate piece of historical evidence from the original DC-panel/rail schedule. The second card labels: blue SAL +, yellow SAL −, white and brown NASA COMBI, green STEAM +, red DECK +, and black STEAM/DECK −. SAL identifies the 12 saloon LED downlights, to be documented separately.
Do not merge the two old cards without tracing. The first panel-end schedule instead labels B2/blue masthead, Y2/yellow steaming, and B3/green bow. The NASA R3/brown + B4/white pair is separately confirmed by the owner and matches the second card; the deck/red function agrees in both cards. The black shared negative is documented as a card label but has not been measured at the busbar. Full side-by-side source comparison.
The manufacturer’s pigtail colours and the colours of the separate 2-core/3-core mast cables remain distinct from these seven-core trunk labels; the forecabin connector mapping remains unverified.
Manufacturer references (separate model identity from electrical verification)
- NASA Marine Supernova Combi product and original fitting instructions (PDF) explain a two-wire polarity-reversing tricolour/anchor arrangement, consistent with Ragtime’s NASA Combi. The installed suffix/revision is not independently confirmed.
- Osculati 13.243.88 black combined LED light — owner-confirmed installed model. Manufacturer specifications include 9–33 V supply, 225° / 3 NM white steaming LED, four 1 W deck LEDs and published current of 0.37 A at 12 V. These are not measured Ragtime values. Technical PDF.
- 13.243.88 product pigtail wiring reference: yellow + steaming, brown + deck, white common − at the manufacturer pigtail. The historic Y2/yellow Oceanflex forecabin trunk conductor, the secondary distribution and the separate mast-going cable are different, untraced parts of the installation; do not assume the leads connect colour-for-colour.
Important protection question: NASA’s published Supernova Combi instructions call for a 1 A fuse. Ragtime’s confirmed feeder is an older 10 A panel breaker. We do not yet know whether a smaller local fuse is fitted, what cross-section is protected, or the exact installed NASA variant. This is a survey/coordination item, not a conclusion that the installation is unsafe or noncompliant.
Outstanding onboard survey
The Osculati 13.243.88 model, Oceanflex 7 × 1.5 mm² panel-to-forecabin trunk, NASA mast 2 × 1.5 mm² cable, Osculati mast 3 × 1.5 mm² cable and the NASA R3/brown + B4/white switched pair are now owner-confirmed. The next survey is the forecabin starboard-locker secondary connectors: identify onward runs to bow, saloon and mast (via the swan neck), negatives, joints and any jumpers. NASA variant, exact correspondence between the 2-core mast wires and brown/white trunk cores, polarity-switch contacts, assumed negative busbar connections and local downstream protection remain open.